The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way.
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.
The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.
Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way...
Features:
- Twin cup holders
- Extra padded lid for comfort
- Padded sides for an all over softened feel adding to the quality of this product
- High-Quality full-width lid hinge in black with an anti-rattle lid latching
- Genuine Land Rover locking lid latch
- Secure and solid installation
- Designed to provide maximum storage at the correct height for armrest and posture
- Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.
Style:
- Available in all our trim options to match any interior
- Available in our full range of Scottish Leather
- Personalise colour schemes and stitching.
Specifications:
- Fits between all OEM and Exmoor seats in the front of any Land Rover
- Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
- Fits the original fittings for Defender or Puma vehicles
- In many cases, you will not need to drill for fitting - if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
- Other models may require drilling; locking nuts are supplied as standard
- Internal fittings are neatly hidden once fitted
- Fitting time with factory fitting points approx 20 minutes
- If drilling is required allow 1 hour - enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.
Measurements:
The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.
PLEASE NOTE: The above pricing only covers bespoke options from our current Bridge Of Weir Leather
The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.
